| Service item |
test method |
range |
| Electronic and Electric approval |
FCC Method-47 CFR Part 15 Subpart B |
9 kHz-40 GHz |
Low power RF Electric Machinery approval |
47 CFR FCC Part 15 Subpart C
NCC LP0002 |
9 kHz-40 GHz |
| Industial,scientific,medical equipment approval |
FCC Method-47 CFR Part 18 |
150 kHz to 26.5GHz |
| Electromagnetic disturbance characteristics of industrial, scientific and medical radio-frequency equipment EMI approval |
CISPR 11
EN 55011 |
Conduction Interference:
9 kHz-30 MHz
Radiation Interference:
9kHz-26.5 GHz |
| Audio and television broadcast receivers and related equipment- related equipment- radio frequency interference approval |
CISPR 13
EN 55013
CNS 13439
AS/NZS CISPR 13 |
Conduction Interference:
150 kHz-30 MHz
Radiation Interference:
30 MHz-1 GHz
Antenna Point Voltage
Interference:
30 MHz -2.15 GHz
RF Output Terminal
Interference:
30 MHz -2.15 GHz |
| Electric appliance and serial approval |
CISPR14-1
EN 55014-1
CNS 13783-1
AS/NZS CISPR 14.1 |
Conduction Interference
:150 kHz-30 MHz
Interference Voltage:
30 MHz-300 MHz
Click Rate:
150K, 500K, 1.4M, 30MHz |
| Electrical lighting and similar equipment approval |
CISPR 15
EN 55015
CNS 14115
AS/NZS CISPR 15 |
Conduction Interference:
9 kHz-30 MHz
Magnetic Field Interference:
9 kHz-30 MHz
Insertion Loss:
150 k-1605 kHz |
| Uninterruptible power system |
EN 62040-2
IEC 62040-2
AS 62040.2
CNS 14757-2 |
150 kHz-26.5GHz
|
| Sound and television broadcast receivers and associated equipment EMS approval |
CISPR 20
EN 55020
CNS 14409
|
Testing Voltage:
100~270Vac(single phrase)
Testing Current:
16A
150kHz to 1GHz |
| Information technology system and equipment. approval |
CISPR 22
EN 55022
CNS 13438
AS/NZS CISPR 22 |
Conduction Interference:
150 kHz-30 MHz
Radiation Interference:
30 MHz-26.5 GHz |
| Technical specification for digital terrestrial television receivers |
CNS14972
D-BOOK
E-BOOK
|
470MHz~850MHz
|
| Information technology equipment EMS approval |
CISPR 24
EN 55024 |
Refer to the Following IEC61000-4 Serial |
Harmonic Current EmissionsInterference Approval |
IEC 61000-3-2
EN 61000-3-2
AS/NZS 61000.3.2 |
Test voltage :100-250 V (single phase)
Test current :0-16 A
Harmonic order:(1 to 40) orders
|
Voltage Fluctuation and Flicker Measurement approval |
IEC 61000-3-3
EN 61000-3-3
AS/NZS 61000.3.3 |
Test voltage :100-250 V (single phase)
Test current :0-16 A
|
| Electrostatic discharge Immunity test |
IEC 61000-4-2
EN 61000-4-2
CNS 14676-2 |
Air Discharge:
0-25 kV
Contact Discharge:
0-10 kV |
| RF radiated fields immunity test |
IEC 61000-4-3
EN 61000-4-3
ENV 50204
CNS 14676-3 |
Frequency Range:
27 MHz-1 GHz
Field Strength:
10V/m(Max)
Frequency Range:
1GHz-2.5 GHz
Field Strength:
3V/m(Max)
AM Compensation
Frequency Range:
895 MHz-905 MHz
PM Compensation |
| Electrical fast transient/burst immunity test |
IEC 61000-4-4
EN 61000-4-4
CN S14676-4 |
Interference Voltage:220 V-5.5 kV |
| Surge Immunity testing |
IEC 61000-4-5
EN 61000-4-5
CNS 14676-5 |
Open circuit voltage:0-6 kV
Short circuit current:125A-3300A |
| Conducted disturbances immunity |
IEC 61000-4-6
EN 61000-4-6
CNS 14676-6 |
150 kHz-230 MHz
AM Compensation, 10 Vrms |
| Magnetic field immunity |
IEC 61000-4-8
EN 61000-4-8
CNS 14676-8 |
Continuous Magnetic Field:
1 A/m-100 A/m |
| Voltage dips, voltage interruptions and voltage variations immunity test |
IEC 61000-4-11
EN 61000-4-11 |
Voltage Interruption:100 %
Voltage Dips:0-100 %
Voltage Variations:
Standard Nordstrom Waveform |
| Oscillatory wave immunity test |
IEC 61000-4-12
EN 61000-4-12
GB/T 17626.12 |
Testing equipment power
range:
Ringwave 0.5μs/100 kHz,
0-6 kV
Osc. Wave 75 ns/100 kHz
and 1 MHz, 0-2.7 kV |